So I have been slacking off on my retro...Slowwhitecivic(lanother forum) told me to get off my ass and get to work, so i did and here is the current progress with the help of Slowwhitecivic who lives miles away
1st is the Projectors..Lexus D3S Bixenon projectors with solenoid for hi/lo beam
2nd Set of Headlights(Note these have already been blacked out not the same i used)
Sanded and then painted
and then blacked out
3rd is a set of 6" stove bowls, jb weld, and your choice of shrouds(I used D8 shrouds)
Here is how slowwhitecivic explained it to me..pretty simple
Here is the aiming part(curtosy of HidPlanet)
http://www.hidplanet.com/forums/viewtopic.php?t=17073&start=0
And now for the almost finished product from production to almost finish
Pics of them jb welded to housing
I forgot the wiring part...will take pics when i have time..Basically bought the Bixenon wiring harness from The Retrofit Source(this can also be made but too lazy)
http://store.theretrofitsource.com/product_info.php?cPath=28&products_id=81&osCsid=465c22010ee72edeaab4e0bc3a701245
My cutoff line
Random Pics:
Letting them dry over night
Just Jb welded to housing
Test Fitting
Install pics(night shots to come possibly tonight)
1st is the Projectors..Lexus D3S Bixenon projectors with solenoid for hi/lo beam
2nd Set of Headlights(Note these have already been blacked out not the same i used)
Sanded and then painted
and then blacked out
3rd is a set of 6" stove bowls, jb weld, and your choice of shrouds(I used D8 shrouds)
Here is how slowwhitecivic explained it to me..pretty simple
Here is the aiming part(curtosy of HidPlanet)
http://www.hidplanet.com/forums/viewtopic.php?t=17073&start=0
And now for the almost finished product from production to almost finish
Pics of them jb welded to housing
I forgot the wiring part...will take pics when i have time..Basically bought the Bixenon wiring harness from The Retrofit Source(this can also be made but too lazy)
http://store.theretrofitsource.com/product_info.php?cPath=28&products_id=81&osCsid=465c22010ee72edeaab4e0bc3a701245
My cutoff line
Random Pics:
Letting them dry over night
Just Jb welded to housing
Test Fitting
Install pics(night shots to come possibly tonight)
Last edited by MidnightCivic on Sat Jul 18, 2009 3:43 pm; edited 1 time in total